Implementing new tasks

There are two scenarios for adding a task to MultiTaskBattery:

Adding a task locally to your experiment. The task lives only in your experiment folder and is registered via task_modules in your constants.py. The shared package is unchanged. This is the right path for almost everyone — see experiments/example_custom_task for a working reference.
Contributing a task to the shared library. The task is added to MultiTaskBattery/task_blocks.py, task_file.py, and task_table.tsv, documented in task_details.json, and submitted via pull request. Use this path only when you want others outside your project to use the task too.

Adding a task locally to your experiment

Recommended layout: both the runtime Task class and the file-generator TaskFile class for one task live in a single module in your experiment folder.

1. Create a local module

Add a new .py file (e.g. my_tasks.py) in your experiment folder that defines both classes:

from MultiTaskBattery.task_blocks import Task
from MultiTaskBattery.task_file import TaskFile
from psychopy import visual, event
import pandas as pd
import numpy as np

class MyTask(Task):
    def __init__(self, info, screen, ttl_clock, const, subj_id):
        super().__init__(info, screen, ttl_clock, const, subj_id)
        self.feedback_type = 'acc+rt'   # or 'none', 'acc', 'rt'

    def init_task(self):
        ...  # read trial info, load stimuli

    def display_instructions(self):
        ...  # task-specific instructions

    def run_trial(self, trial):
        ...  # display stimulus, collect response, return trial

class MyTaskFile(TaskFile):
    def __init__(self, const):
        super().__init__(const)
        self.name = 'my_task'  # must match the row in task_table.tsv

    def make_task_file(self, ..., file_name=None):
        ...  # generate trial-level rows, write tsv

Methods to implement on the Task subclass:

init_task(): Read the task’s trial-info TSV into self.trial_info. Load any stimuli into memory.
display_instructions(): Show task-specific instructions on the screen.
run_trial(trial): Run a single trial — display stimuli, collect responses, return the trial row with any added columns.

Useful methods inherited from the Task parent:

wait_response(start_time, max_wait_time): Wait for a button press and return (key, rt).
display_trial_feedback(give_feedback, correct): Show a green check or red cross based on correctness.
screen_quit(): Check for the escape key to quit the experiment.

feedback_type controls the end-of-run scoreboard: 'none', 'acc', 'rt', or 'acc+rt'.

If your task generates random stimuli (no fixed stimulus file per run), omit run_number from the make_task_file signature — make_files.py inspects the signature to decide whether to pass it.

2. Add a row to a local task_table.tsv

Create a task_table.tsv file in your experiment folder with a single tab-separated row for your task (same columns as the shared table):

name        task_class      descriptive_name        code
my_task     MyTask  my_task mytsk

The local table is merged with the shared one automatically when make_files.py passes exp_dir=const.exp_dir to tf.make_run_file and tf.get_task_class (the example make_files.py already does this).

3. Register your module in constants.py

Import your local module and add it to task_modules:

import my_tasks
task_modules = [my_tasks]

At runtime, ut.get_task_class walks task_modules first and falls back to the shared package. At file-generation time, ut.get_task_file_class does the same — and appends 'File' automatically when searching local modules — so make_files.py needs zero changes for new tasks.

4. Add stimuli (if your task uses them)

Stimulus files (images, audio, video) live under stimuli/<task_name>/ at the repository root. If your task generates stimuli procedurally, skip this step.

5. Test

Add your task to the blocks list in your experiment’s make_files.py (as ('my_task', None), or with a condition), generate the run and task files, and run run.py. experiments/example_custom_task is the reference for a working custom-task setup.

Contributing a task to the shared library

If you want your task to be included in MultiTaskBattery so it is available to other users, do everything from the local section above, plus the extra steps below.

1. Move the classes into the shared package

In the shared package the runtime and file-generator classes live in separate modules and reuse the same bare name (no File suffix):

Move the Task subclass into MultiTaskBattery/task_blocks.py.
Move the TaskFile subclass into MultiTaskBattery/task_file.py, dropping the File suffix from its class name.
Move the row from your local task_table.tsv into MultiTaskBattery/task_table.tsv.

2. Add task details

Add an entry for your task in MultiTaskBattery/task_details.json. The key must match the task name from task_table.tsv. Each entry should include:

short_description: a brief one-line summary of the task.
detailed_description: a longer description of what the task involves.
recorded_metrics: Accuracy + RT, Accuracy, RT, or None.
conditions: comma-separated list of conditions (omit if none).
reference: academic citation (omit if none).
task_file_columns: documents the columns of the generated task file — each with a type and a description. List every column the file contains: the shared ones (trial_num, trial_dur, stim, etc.) and any task-specific ones. For condition and trial_type columns, spell out what the values mean (e.g. 0 = left, 1 = right).

Tips for the detailed description:

Describe what the participant sees and does on each trial.
Mention the expected mental processes or brain regions that the task is designed to activate (e.g., “targets the language network”).
If your task has conditions, describe what each involves and how they differ.

For example, the demand_grid entry:

{
    "demand_grid": {
        "short_description": "2AFC spatial working memory task on a grid.",
        "detailed_description": "Participants see a sequence of boxes lighting up on a grid...",
        "recorded_metrics": "Accuracy + RT",
        "reference": "Fedorenko et al. (2013)...",
        "task_file_columns": {
            "trial_type": {
                "type": "int",
                "description": "Numeric code for the correct side (0 = left, 1 = right)."
            },
            "grid_size": {
                "type": "tuple",
                "description": "Grid dimensions as (rows, cols)."
            }
        }
    }
}

All fields appear on the task descriptions page, with the columns shown in a collapsible Task file columns table.

Document the make_task_file parameters separately, by writing a Google-style docstring (with Args: and Returns: sections) on the method. Those render on the Task_file module reference page. In other words: make_task_file parameters are documented in the API reference (via the docstring), while the columns they produce in the task file are documented in task_details.json (via task_file_columns).

3. Add a documentation image

Drop a screenshot of your task as docs/images/<task_name>.png. It will automatically appear on the task descriptions page. For multiple images use <task_name>_2.png, <task_name>_3.png, etc. You can also add a short demo video as docs/images/<task_name>.mp4 (and <task_name>_2.mp4, …) to render an inline video player.

4. Open a pull request

Fork the repository on GitHub.
Create a branch for your task (e.g. add-my-new-task).
Make your changes (steps 1-3 above).
Push and open a pull request against main.